32
1
This is a grip that fits the stock micro draco screw, took innitial model from uncredited uploud and made hole on the bottom smaller as Cugir doesnt ship with button head screws and needs a smaller profile or it wont pin the reciever. Also removed some unnessisarily aggressive carving on the base so it prints better. As with all grips, generally 25% gyroid with 5 lines or 100% with 3 lines works fine. I like weight, so I always use 100% for my Draco prints.
LBRY Tags: 3d2a
56
3
Minimalist Micro Draco Tri Picrail
This is a reuploud from last years, I improved the design and reliability.
Micro Draco Picrail
Tested - no deformation after 100 rounds rapid fire…
24
2
Minimalist Micro Draco picrail
This is a reuploud from last years, I improved the design and reliability.
Micro Draco Single Picrail - This is specifically desgined for a VFG, so …
24
2
Micro Draco AFG Model 2
This is an alternate minimalist handbreak for the Micro Draco
Tested - rapid fired 100 rounds with no deformation
This functions at any infill, but…
10
1
Simple Short Micro Draco Stock
This is not tested for durability but will fit....I suggest 80% infill or higher, Brim and snug supports touching build plate. It is a short stock, s…
Twitter
Matrix
Source
