400
11
View this release
Alternative links
This is my version of the [One Hundred Concept's Light Cap](https://onehundredconcepts.com/products/lightcap). There are 3 sizes to chose from, so there should be one that works for a plethora of weapon lights. See the attached photo list for what sizes to print for each specific light.
Pair this with Shock Cord (a thin bungee cord) and a Ranger Band (a cut up rubber bicycle Inner-tube) to cover your light to prevent from White Light NDs.
There may be another file that can replace the use case of the ranger band with something printed as well, but the variances between light diameters means that it might take a while to release.
Fuzzy skin settings for hiding layer lines, making it less shiny, and spray paint sticking better if you choose to paint it:
[Best looking]
0.1mm layer height:
0.2mm thickness
6mm density
[Best for 0.2mm layer height]
0.1mm thickness
10mm density
Here's how to properly install the light cap:
https://www.youtube.com/watch?v=Ihw763jx-Lc
LBRY Tags: light; weapon light; 3d printed; rifle; light cap
Pair this with Shock Cord (a thin bungee cord) and a Ranger Band (a cut up rubber bicycle Inner-tube) to cover your light to prevent from White Light NDs.
There may be another file that can replace the use case of the ranger band with something printed as well, but the variances between light diameters means that it might take a while to release.
Fuzzy skin settings for hiding layer lines, making it less shiny, and spray paint sticking better if you choose to paint it:
[Best looking]
0.1mm layer height:
0.2mm thickness
6mm density
[Best for 0.2mm layer height]
0.1mm thickness
10mm density
Here's how to properly install the light cap:
https://www.youtube.com/watch?v=Ihw763jx-Lc
LBRY Tags: light; weapon light; 3d printed; rifle; light cap
Related to This Release
247
14
Scout's Sling Hook
Based off of the [One Hundred Concepts Sling Hook](https://onehundredconcepts.com/products/slinghook), this is a simple solution to the common proble…
59
4
RMR cap sights V1
Set of raised iron sights made to fit an RMR cut slide. Can see over most legally purchased muzzle devices.
PLA+ 230/60, 99% infil with rafts at .2…
592
14
Scout's SmolStop Handstop
Scout339's 'SmolStop' Hand Stop, inspired from Driven Arm's ShortStop.
Requires 1x T-Nut for MLOK.
For duty-grade strength, I recommend 6 walls and…
205
4
Scout's Gasblock jig
If you've ever built an AR15, you'll probably know how annoying it is to attempt to keep a low-profile gas block in place while you align and drive t…
126
6
Scout's Lightbar Mount
A surefire Scout light mount designed to mimic that of the T.REX Arms Lightbar, but printable. The Lightbar's primary purpose is to extend the light …
Twitter
Matrix
Source
