A remix of the AWCY ScARpion to give a touch of MP5SD flavor.
FORGOT TO ADD: The barrel is 7.5" with a KAK long flash can. If you go outside of that it'll probably look goofy.
I hope everything works well for you all. I'm not a designer. And I'm even worse at trying to make a compiled zip folder with all needed files and information.
If there is a problem, leave a comment and I'll try to get back ASAP.
LBRY Tags: 3d printed; art; guns
u/Future-Albatross8147 · 2025-01-03 04:23:09 UTC · score 4
It's basically all the hardware required for the standard ScARpion from AWCY plus a few additional common pieces M3/M4 hardware. And a small spring and 3mm pin for the modification I did in the rear to allow for easier cleaning. (There is a little spring loaded plunger in the rear.) …
u/Future-Albatross8147 · 2025-01-03 04:25:23 UTC · score 1
Maybe one of these days i'll get these post figured out... Check the odd sea under the name Imlegless or ScARP5-SD. If you're interested.
I had a full post typed out but I guess I screwed it up and none of that text was shown here.
I'm a rookie at designing so, it may not be withou…
FGC-9 Bufferless
FGC9 MKII (Slim)
CZAR edit
Twitter
Matrix
Source
