143
11
View this release
Alternative links
The design of this mag release will do a few things.
-Better grip
-Changes the feed of the mag so the smooth edges of the mag lift the release up and out of the way, when inserted.
Minimums
Layer Height: 0.16mm
Material : Polymaker PLA Pro/Plus OR COEX Glass Filled Nylon
Use a slicer with the Arachne engine. PrusaSlicer 2.5.0+ or Cura 5.0+
-Better grip
-Changes the feed of the mag so the smooth edges of the mag lift the release up and out of the way, when inserted.
Minimums
Layer Height: 0.16mm
Material : Polymaker PLA Pro/Plus OR COEX Glass Filled Nylon
Use a slicer with the Arachne engine. PrusaSlicer 2.5.0+ or Cura 5.0+
Related to This Release
60
1
AR - 15 AR -22 - Ar buffer void filler. Receiver extension filler.
Purpose:
This insert fills the empty space inside an AR-15 buffer tube (receiver extension) when the buffer and buffer spring are removed.
Compatib…
453
11
Steyr AUG extended magazine release 3D printed (Standard only)
Customizable mag release for standard stock Steyr AUG. You can easily unscrew the face plate and install another, and print your own designs. Require…
208
18
SF5(smooth side) endcap based on the AWCY A3 collapsible brace
No real docs. But if you've made a SF5 and have made the collapsible 6mm rod stock/brace from AWCY? then you're good to. Push button is quite handy. …
2255
41
Ruger MK I/II/II Standard and 22/45 Super Pack - Open Beta
Open Beta for my work improving IMA and PixelSmoke's MK Series work that was abandoned in Beta.
No build guide yet, you should be familiar with maki…
1168
25
GalileoAR: Galileo 10/22 receiver that takes AR15 trigger groups OPEN BETA
Completely untested version of the Galileo that takes AR15 trigger groups.
Please support the original creators by downloading the Build Your Own Ad…
Twitter
Matrix
Source
