232
9
View this release
Alternative links
This is a very simple marking jig to be used to guide your cut for these triggers to make them compatible with the Hoffman Tactical Super Safety.
The below triggers should be compatible:
Rise Armament Single stage drop in triggers like the Rave PCC, Rave 140, etc.
NOT SURE ABOUT THEIR TWO-STAGE TRIGGERS AND I WOULDN'T WASTE MONEY CONVERTING ONE FOR SUPER SAFE...SORT OF DEFEATS THE PURPOSE?
These will also work with the more budget Aim Surplus SSTAT triggers. These are made by Rise Armament and just a little less fancy. But the profile of the back of the trigger is the same.
Print the jig, cut the material off, and install in your build.
This is not sponsored or endorsed by Rise Armament or Aim Surplus. Use this jig at your own risk. DB Does not assume any responsibility for your gunsmiffing.
LBRY Tags: super safety; trigger; ar; 3d printing; gun
The below triggers should be compatible:
Rise Armament Single stage drop in triggers like the Rave PCC, Rave 140, etc.
NOT SURE ABOUT THEIR TWO-STAGE TRIGGERS AND I WOULDN'T WASTE MONEY CONVERTING ONE FOR SUPER SAFE...SORT OF DEFEATS THE PURPOSE?
These will also work with the more budget Aim Surplus SSTAT triggers. These are made by Rise Armament and just a little less fancy. But the profile of the back of the trigger is the same.
Print the jig, cut the material off, and install in your build.
This is not sponsored or endorsed by Rise Armament or Aim Surplus. Use this jig at your own risk. DB Does not assume any responsibility for your gunsmiffing.
LBRY Tags: super safety; trigger; ar; 3d printing; gun
Related to This Release
3334
38
DB's Fire Control Group(FCG) Reinforcement Plate Dev Pack
This dev pack is designed to help you integrate fire control group reinforcement into your design. There are also instructions for ordering the plate…
479
14
VZ61 Rear Accessory Mount for Southern Tactical Receivers by DB Firearms
DB's Integrated Rail/Red Dot mount for Southern Tactical VZ61 Receivers
Mounts to existing holes on back of receiver. Designed for RMR footprint red …
674
22
Hexplosion Pistol Stand by DB Firearms
Simple pistol stand. This will obviously not fit all pistols.
Known compatibility:
Glock 9mm/40 near perfect fit
2011 (LOOSE FIT SIDE TO SIDE, but …
67
4
IK751717V5-BT-CZ Front Rail (FR) Frame - Removable Swell 2023-04-26 07-34-20
I have been making many different variations on designs and I am posting them here individually to see which ones are popular.
Here is a guide to t…
813
16
M-Lok Marksman Forend (L-X22 Chassis) (10/22 Compatible)
M-Lok Marksman Forend (L-X22 Chassis) (10/22 Compatible): Laffs Dynamics
An elongated forend for the L-X22 10/22 Chassis, with six M-Lok slots for a…
Twitter
Matrix
Source
