238
8
View this release
Alternative links
3d2a oriented print profiles designed for bambu X1, but works on P series as well. Profiles for polymaker PLAPro, PA6CF, and 95A TPU. All credit for these amazing profiles goes to: https://odysee.com/@trenbaloneysandwich:0
Related to This Release
293
6
.380 Decker Firing Pin Sleeves
The Decker's BOM calls for its firing pin to be cut from 1/8" stock to 127mm long. Even if cut perfectly, I have found that sometimes this length is …
97
3
P-38 Drawings from Mauser
The most complete P38 drawings from Mauser
939
17
Svelte 17 - GEOMETRY FOR PRINTING
.15mm layer height is advised.
The Magazine Slide should be printed with ironing on the top surface. The hole for the slide in the frame should be a…
432
12
Patron Saint of Javelin
This file was brought my attention by a follower supporting Ukraine. I cleaned up the file removing some artifacts, and making it better for FDM prin…
303
20
2
Devbulletin- Sept-oct 2024
Attached is the OBK-69 Dev Bulletin for sept-oct 2024
Twitter
Matrix
Source
