140
6
You will need some m3 allen head screws and m5 screws and nuts to assemble things.
The short strut will let you get down lower on the stock if the standard one is too high.
It's recommended to print all the structural parts with 10 walls and at least 40% gyroid infill, cheek riser can be weaker.
The shorter strut needs to be used with the shorter cheek riser.
The short strut will let you get down lower on the stock if the standard one is too high.
It's recommended to print all the structural parts with 10 walls and at least 40% gyroid infill, cheek riser can be weaker.
The shorter strut needs to be used with the shorter cheek riser.
Related to This Release
2020
33
1
Unseenkiller - Rook Telescoping Stock and Brace
No Odysee content descriptions will be given.
No Odysee comments will be monitored.
Please read the readme for information inside of each ZIP.
Feel…
452
19
GCODE A3 TAC STOCK RE-RELEASE
Same A3 Tac Stock, but fixed option. AND REINFORCED PLATES , That you will send to sendcutsend and have made.
400
12
SB tactical SBBDW brace to stock adapter
This is a two part replacement back piece for a SBPDW brace (or $75 amazon bootleg) that converts if from a brace to a stock. I printed the front pie…
237
18
1
BladeM2 Chopper, KAK Mini Buffer Tube Kit
This tool, when 3D printed, will make it easier to chop a Shockwave Blade M2 to seamlessly fit a KAK Industries' Mini Buffer Tube kit. Should one wan…
96
6
STEN AT HOME wire stock v1
Original design for use with the revisedbooli brace hinge included
LBRY Tags: keltec cp33; sten at home; cp33; cp-33; keltec
Twitter
Matrix
Source
