This here is tiny, fully DIY electrically primed shotgun project. No firearm parts are needed, cartridges are printed too.
Only things needed are some 4 and 3 mm screws, 10.4mm ID seamless pipe, a couple of pen springs and an arc lighter.
Assembly information and useful tips are included in pictures and .skp file.
Built at your own risk. Although this design has been tested, excessive powder loads and uncareful handling may cause loss of fingers, limbs and eyes. Use black powder or smaller amount of smokeless/black powder mixture for best results.
As of 2022/02/08 barrel retainer and lock has been updated. Do not print older versions of these stl's as they have tendency to break and eject spent shell backwards into shooters face.
LBRY Tags: fosscad; free speech; black powder
u/Shit_On_Wheels · 2022-07-12 15:48:36 UTC · score 12
IEDs usually have primary charge (detonator) that's extremely sensitive, some of these compounds may be ignited by high voltage spark. Do not google TATP.
It's not only voltage that matters, but also amperage and frequency of spark pulses.
I've read through an interesting article on some blog…
u/blade740 · 2022-08-02 20:22:00 UTC · score 0
>Isn't that what every single politician does when they find a program they don't care for?
Sorry, what? When have you seen a politician run a scam like this on a government program they didn't like? Like, a politician that criticizes welfare, then goes out and files for food stamps? Or what? I'm not …
u/Sangre_De_Truchas · 2022-07-13 15:55:54 UTC · score 30
First gen guns weren't that impressive and had that awful safety you had to press with your thumb for every shot! Which is why people would glue them, screw them, or melt them in place. V2 and V3 guns are much more powerful! "Lawn-and-Garden" varieties shot a larger volume of salt, also wor…
FamAR Release
GOPNIK - 3D printed hand cannon!
Rocket Derringer
Twitter
Matrix
Source
