1058
13
2
Updated plate stack lower pdf drawing, changed 4mm to 5mm thickness on sheet 6. Those parts won't work at 4mm thick aluminum. Can also use 3/16" thick there but will need a shim between the front takedown pin brackets and the side plates.
LBRY Tags: lower; receiver; plate stack; ar15; diy
2671
59
4
SHIN KAIJU Jakl lower
A new kaiju has shown itself to the world!! Hailing straight from the harsh desert wastelands comes the ARECHIDINGORA, will your printer be able to t…
1294
16
1
TDB AR-15 LOWERS
AR-15 Rifle and Pistol lowers that combine the receiver and buffer tube. They require one 6/32 Bolt cut to size for the buffer retainer also a printe…
747
22
1
TDB AR-47 LOWER
AR lower for a BCA side charger to make your rifle feel more like an AK.You will need a printer able to print at least 350mm in one of the axis also …
700
19
Plate stack receiver, V3B, updates after assembly
I've made a few updates after assembling the first one. This one should be a bit easier to put together.
LBRY Tags: lower receiver; diy; 2a; plate …
Twitter
Matrix
Source
