541
6
This is my enhanced Safety drum designed to overcome issues I was having throughout my Plastikov V4 builds. This is a 2-piece design and requires the M3x50mm Socket Head Bolt to work correctly.
Please read the READ ME included in the zip. It is imperative that you first ensure that this selector is functioning properly with your build and is safely preventing the trigger hammer from dropping as well as not inadvertently preventing it from functioning when not in the "safe" position.
Reach out if you have any questions, concerns or suggestions, but more importantly if you find there may be design flaws or issues with what was provided, please let me know
Please read the READ ME included in the zip. It is imperative that you first ensure that this selector is functioning properly with your build and is safely preventing the trigger hammer from dropping as well as not inadvertently preventing it from functioning when not in the "safe" position.
Reach out if you have any questions, concerns or suggestions, but more importantly if you find there may be design flaws or issues with what was provided, please let me know
Related to This Release
807
16
Cyber Draco Plastikov V4- 5.45/5.56
This is my custom remix of the Plastikov V4 by Navi of Boomhandia (aka Ivan the troll). This was inspired by other 3D2A creators, but primarily Cyber…
171
5
amphibeous ak mag release
ambi mag release for ak, in case you are wrong handed, print on its side with a minimum of 20% infill. you will need 4-m3x12 bolts. (m3x10 bolts will…
156
5
ak mag release part 2
part 2
86
7
M76 Bullet Guide CAD Model
I Modeled this a while ago, and uploaded it on a forum. I uploaded it here to make it a bit more accessible. Below is the description I had on my ori…
127
buffer tube plug cap remix
buffer-tube-plug-cap
Twitter
Matrix
Source
