577
26
View this release
Alternative links
Picatinny MP7 Grip by Qwerm
A picatinny version of the folding grip from the MP7A1. This is designed with some tight tolerances so it will most likely require some post processing to get things to move smoothly. I recommend using a file and then running the moving parts back and forth until they move smoothly.
Print Orientation: Check included pictures for recommended print orientations.
Recommended Print Settings:
Layer Height: 0.2mm
Wall Line Count: 4
Infill Density: 30%+
Support: Yes
Fuzzy Skin: No
Required Hardware:
1x M5 30mm Socket Head Screw
1x M5 Hex Nut
1x 6mm E-Clip
1x 1/8" x 1" Roll Pin
1x 1 1/2" x 1/4" Compression Spring
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit
http://creativecommons.org/licenses/by-nc-sa/4.0
LBRY Tags: 3d printed; 3dpg; mp7; guncad; picatinny
A picatinny version of the folding grip from the MP7A1. This is designed with some tight tolerances so it will most likely require some post processing to get things to move smoothly. I recommend using a file and then running the moving parts back and forth until they move smoothly.
Print Orientation: Check included pictures for recommended print orientations.
Recommended Print Settings:
Layer Height: 0.2mm
Wall Line Count: 4
Infill Density: 30%+
Support: Yes
Fuzzy Skin: No
Required Hardware:
1x M5 30mm Socket Head Screw
1x M5 Hex Nut
1x 6mm E-Clip
1x 1/8" x 1" Roll Pin
1x 1 1/2" x 1/4" Compression Spring
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit
http://creativecommons.org/licenses/by-nc-sa/4.0
LBRY Tags: 3d printed; 3dpg; mp7; guncad; picatinny
Related to This Release
240
13
Sling Kontrol - M-LOK
Sling Kontrol - MLOK "by" Qwerm
A shameless ripoff of Subrev's M-LOK Sling Control, a M-LOK accessory that helps store your sling when not using you…
540
13
Shock Cord Scope/Light Cover V1.1
Shock Cord Scope/Light Cover "by" Qwerm
A shock cord retained cap for your light or scope based off of One Hundred Concept's ScopeCap/LightCap/Shock…
199
7
NotaSlate (3D Printable Keymod Handstop)
A small keymod handstop that happens to have the same size and shape as a Slate Stop.
Includes 3 versions and STEP files including STEP files for th…
157
12
MOE AAA & CR2032 Grip Insert
MOE AAA & CR2032 Grip Insert by Qwerm
An insert for a Magpul MOE grip that holds one CR2032 and three AAA batteries.
Print Orientation: Print every…
161
8
1
A2 VFG Pack
A2 VFG by Qwerm
Vertical foregrips in the styling of an A2 pistol grip. Includes Picatinny, M-LOK, and Keymod in vertical and 15 degree mounting. Th…
Twitter
Matrix
Source
