517
10
View this release
Alternative links
Warning - Please Read! - Its recently come to my attention that the OEM and other frames for the P365s have metal inserts to hold the rail module in place and to take the impact of the slide. The frame designs posted here do not accomidate that metal insert and will degrade after about 500 rounds if the frame is made from PLA or PLA+. At this time no other material has been tested but this will get updated if that changes.
So a few weeks ago a friend showed me @Yah3D:5 had posted some frames for P365s. I immediately downloaded the XMacro and was pumped to start printing. While learning how to make and add textures to the grips, I found out that the XMacro and XL use different magazines. I'm not trying to speak ill of Sig but their magazines are really overpriced. Then it hit me, just put the XLs magwell on the XMacro frame. This way I get the grip I can actually hold and a full length frame ditching the overbiting slide, and thus the P365XM (Xtra Medium) frame was created. I really want to know who at Sig thought the short frame on the XL looked good and was a good design choice but thats not what I'm here to rant about. Anyway, this is the v0 of my frame kit bash. And like most things I make, it requires hand fitting, cursing and patients. So far this fits the trigger module thingy and mag release pretty well, it still might need a little help from a rubber hammer to get in place but I'm working on the design so stay tuned. I'm working to add some texturing to the grip and maybe even an intergral gas pedal. Also, a big thanks to Yah3D for sharing the files.
LBRY Tags: p365; foscad; 3dprinting; guns; awcy?
So a few weeks ago a friend showed me @Yah3D:5 had posted some frames for P365s. I immediately downloaded the XMacro and was pumped to start printing. While learning how to make and add textures to the grips, I found out that the XMacro and XL use different magazines. I'm not trying to speak ill of Sig but their magazines are really overpriced. Then it hit me, just put the XLs magwell on the XMacro frame. This way I get the grip I can actually hold and a full length frame ditching the overbiting slide, and thus the P365XM (Xtra Medium) frame was created. I really want to know who at Sig thought the short frame on the XL looked good and was a good design choice but thats not what I'm here to rant about. Anyway, this is the v0 of my frame kit bash. And like most things I make, it requires hand fitting, cursing and patients. So far this fits the trigger module thingy and mag release pretty well, it still might need a little help from a rubber hammer to get in place but I'm working on the design so stay tuned. I'm working to add some texturing to the grip and maybe even an intergral gas pedal. Also, a big thanks to Yah3D for sharing the files.
LBRY Tags: p365; foscad; 3dprinting; guns; awcy?
Related to This Release
1213
21
P365XM v1 Textured
Warning - Please Read! - Its recently come to my attention that the OEM and other frames for the P365s have metal inserts to hold the rail module in …
1171
19
p365 beta
p365 fcu functional but lightly tested print at 45 degree angle rails up may need minor tweeks uses a peice of drill rod for the barrel lockup sorry…
920
16
1
G4365 (BETA)
UPDATE!
The files below include a 10rnd (Micro), a 12rnd (X), and a 17rnd (Macro) version. Also included are magazine base plate adaptors to extend …
702
9
P365 Chassis
This is a chassis that will fit the P365.
232
9
Macro Mag Adapters
Here are a couple of magazine adapters for the P365 Macro. These were made so that you can use your P365 or P365 XL 10 and 12 round magazines on an x…
Twitter
Matrix
Source
