154
4
I made a template to cut a piece of Aluminum tubing 1"ID and 1.25"OD into a sleeve for the ARK upper.
I have included the original ARK upper along with the one I modded to accept the sleeve.
I have not yet printed this nor have I cut the pipe, so revisions may come.
The upper only without barrel nut is 7in long, the barrel nut itself is 1in and the buffer tube is 6.88 in.
All in it is 15.3 in.
I am thinking a partial length buffer tube will give 12in with the tube extending from the barrel nut to halfway down the buffer tube.
As I said, very much a WIP.
I have included the original ARK upper along with the one I modded to accept the sleeve.
I have not yet printed this nor have I cut the pipe, so revisions may come.
The upper only without barrel nut is 7in long, the barrel nut itself is 1in and the buffer tube is 6.88 in.
All in it is 15.3 in.
I am thinking a partial length buffer tube will give 12in with the tube extending from the barrel nut to halfway down the buffer tube.
As I said, very much a WIP.
Related to This Release
407
26
90-Who Final Release - Optimal Fail (Printable Taurus PT92 frame)
Printable Taurus PT92 frame + Accessories
1616
32
CZAR Remix w-OEM Folder
Free file, friends don't let friends use FEDCAD
This is a remix of the CZAR v3 that utilizes an OEM folding mechanism. Huge thanks to s3igu2 for doi…
781
15
MAT9 and BRN9 Evo Mag Open BETA 0.4 (updated 6/22/24)
This is my lower designed for the Matador arms MAT-9 and BRN-9 upper recievers. It uses a SCS ejector, the same Eyebolts as the UBAR2, and Evo Magazi…
322
5
SIGMACX POF-USA PHOENIX 9MM MAG COMPATIBLE LOWER FV1
No description provided for this release
LBRY Tags: 9mm; sigmacx; fosscad; 3d2a; pof usa
150
7
ARK AWCY NurplesMod AR-15 Magwell
Definitely not a bastardized kitbash with a Hoffman Tactical...
My goal here is not to do an ARK in 5.56mm.
Not yet anyway.
I want to use the CMMG …
Twitter
Matrix
Source
