This mod adds a bushing to the face plate of DaFizzlez's NT79. This makes the firing pin slide much smoother and will reduce the chance of a light or off-center primer strike. This also will reinforce the area from bolt thrust a little bit. I included a link to McMaster for the part required. This part is a little pricey, so you might want to shop around. STEP file is included. Roughen up with sandpaper or a file and epoxy in place.
LBRY Tags: nt79; 37mm; awcy; launcher
u/Bigbore_729 · 2024-04-17 21:27:37 UTC · score 50
Welp, I finally finished my NT79. I'm pretty happy with how it turned out. I've got about 15-ish hours in making the stock and forend. Big shout out to DaFizzle for such a bad ass file.
For those interested, here's everything I've done.
Handmade walnut stock and forend
Metal trigger and cocking l…
u/Bigbore_729 · 2024-04-09 03:18:14 UTC · score 19
The NT79 firing pin would dig into the PLA face plate and make it hit the primer off center. This would result in misfire after misfire. Whipped up this little bushing on my mini lathe and modified the plate STEP file. I used a soldering iron to insert the bushing. I will test it tomorrow, but I can a…
NT79 with Filagree Barrel
NT79 stronger latch remix
NT79 Extra Weight Hammer
Twitter
Matrix
Source
