75
1
My version of @pembie000industries:1 GSPOT trip. The changes I made was shortened the trip by 1.75mm to eliminate binding aswell as flattened the top of trip out so it has more contact with the underside of the barrel. There is a 3.81mm height and a 4.16mm width notch cut into the trip where the spring would normally sit. The reason for the notch is to hold the spring in place and have a consistent reset. Just make sure your spring length is 7.62mm or longer
Upload file to send cut send for metal
Make sure trip is 3.2mm thick and 304 stainless or stronger
LBRY Tags: c:unlisted
1276
17
2
Carbon MCXish with sauerkraut V2 hinge
If you're looking for the Carbon MCXish remix, its in my MCXish remix megapack.
If you like the Carbon MCXish remix I made but don't like the MCXis…
497
16
furikake v1.5 11.5" & 16" shroud (beta)
these 2 shrouds are compatible with all hardware from the main release just intended to give the longer barreled uppers a place to live
363
8
1
BETA: P322 to CP33 magazine adapter
BETA: P322 to CP33 magazine adapter. this set of parts allows the use of p322 25 round magazines in a CP33. You just glue them to the body of a P322 …
179
3
M1337 - M2 Tripod Pintle Adapter
This is an adapter to use Nopel's M1337 Pintle with an M2 tripod, originally used with the Browning M1919. I printed this out of PLA+, 3 outside laye…
Twitter
Matrix
Source
