81
5
Created a jig for cutting the 6.5MM nub into the .5" bar stock for the bolt face. This makes cutting easier with hand tools in a table vice. This does not replace the other jig provided in the original HW4 Mega Pistol file.
LBRY Tags: nopel; megapistol; hw4; 3d2a; jig
5338
93
10
HW4 Mega Pistol
Revised design, and a new more detailed build guide for the Mega Pistol, originally created years ago by Humphrey Wittingtonsworth IV. Many issues w…
464
13
11
Cetme L Flat Bending Jig
I modeled this to practice using Fusion360, it is based off of HMG Cetme L bending jig. The mandrel is made from steel and the die is made from alumi…
328
9
3DPrintFreedom: Mod9v3 Extractor Bending Jig
Basic Bending jig intended for use with 1/8"x0.02" spring steel. Bends an extractor for use with the Mod9v3 Bolts
200
4
UMP 11/9 16" Barrel Collar
If you have a longer rifle barrel, the free floating barrel likely has a slight wiggle without a muzzle device like the original design. This collar …
Twitter
Matrix
Source
