597
10
View this release
Alternative links
Use what's best for your setup and print it in the way listed in the guide. I used the minimum support settings on the readme and normal snug supports for the main receiver, and for the supports on the integrated rail's just use common sense; here I painted them in the Bambu Slicer and used snug supports.
The only difference between this and the regular nylaug receiver is that:
1: Symbols were removed
2: The little stem for the front was shortened; even with the Jig I was having issue's with fitting on mine as listed per 3.2 Front on the readme.
3: Of course, the rails are integrated to the receiver to remove a failure point of the nylaug.
4. removed a flaw in the design where supports were a pain to remove at the top portion that interfaces with the mid standard stock file (that part where there is a hole in the OEM design and now its closed but still has an indent). It's completely useless and adds more complexity when printing.
The only difference between this and the regular nylaug receiver is that:
1: Symbols were removed
2: The little stem for the front was shortened; even with the Jig I was having issue's with fitting on mine as listed per 3.2 Front on the readme.
3: Of course, the rails are integrated to the receiver to remove a failure point of the nylaug.
4. removed a flaw in the design where supports were a pain to remove at the top portion that interfaces with the mid standard stock file (that part where there is a hole in the OEM design and now its closed but still has an indent). It's completely useless and adds more complexity when printing.
Related to This Release
431
6
aug nylaug top rail
top rail compatible with heatserts and 10 inch aluminum picatinny rail
437
11
NylAUG OEM style accessories
These are not direct copies since I made small improvements so are "OEM style." Includes:
OEM style mag release
OEM style trigger
OEM style buttplate…
40
3
NYLAug Top Rail Mount
Remix of @smoothbrain:4 top rail for those who shaved the bump off their surplus AUG stock.
You'll need m4 heatserts, m4x8-10 countersunk screws, an…
528
8
Nylaug KAK Gasblock Handguard
This is a remix of gmeclout45's Nylaug handguard that actually fits over the KAK gasblock without issue. His original design used an integrated pic r…
1222
10
NylAUG Build Video
This is the video build series for the NylAUG recorded by matthew550 and edited by rangeroftheorder, both of which gave me permission to make public …
Twitter
Matrix
Source
