43
3
Updated: I added more to the v4. Now instead of just indexing on the "barrel nut" it also indexes off the barrel as well. This makes it much more sturdy.
Barrel shroud for a Mac 11, specifically the MacDaddy. Some material may have to be removed from the frame that is under the barrel so the shroud can fit. The material that is removed will NOT affect the structural integrity of the frame. M4 nut and screw required. I've test fitted with PLA but recommend using Nylon for final product.
LBRY Tags: fosscad; 3d2a; macdaddy
178
2
Mac 11 Picatinny stock mount
Picatinny stock mount for a Mac 11. Fits my VMAC perfectly, given how Macs are made, the size may need to be adjusted. Uses an M3 screw and nut to …
98
3
Tubular adapter for Mac daddy 2.0.
this is a one off for a spare part i had lating around, but could be easily remixed to accept a mil spec buffer tube. You will also need the galileo …
84
3
Mac Daddy Barrel Shroud v3 (2)
Barrel shroud for a Mac 11, specifically the MacDaddy. Some material may have to be removed from the frame that is under the barrel so the shroud can…
39
2
MAC DADDY BARREL SHROUD V2
Barrel shroud for a Mac 11, specifically the MacDaddy. Some material may have to be removed from the frame that is under the barrel so the shroud can…
Twitter
Matrix
Source
