433
7
View this release
Alternative links
Introducing MMK 342-S 7.65 mm - Open Bolt Action Semi Automatic Pistol
This model is separated version of the MMK 342. Barrel, Upper Receiver and Lower Receiver are seperated from the Frame part to keep it replaceable.
I am looking for cooperations & partnership or business opportunity to create legalized manufacturing, this model is another example for low cost production.
- This model prepared for .32 ACP(7.65 mm) ammunition, tolerances has been given, but haven't tested, remains as a prototype at this moment.
! RISKS ARE YOUR OWN IF YOU'RE GOING TO TEST THIS MODEL !
- After printing all of the parts(14 parts), you need 4 spring(for trigger, trigger holder, striker, magazine) then ready to go.
- This is an open bolt action, if the magazine is loaded and striker was pulled, it will be ready to fire.
- Two Barrel Connector Pin required.
- Two Receiver Connector Pin required.
- This model can be converted to rifle.
- Barrel and Lower Receiver printable with bigger nozzle without support (0.8, 1 or 1.2 mm)
- For striker part, Nylon+CF or PC filament recommended.
You can reach me via message, twitter or e-mail, Thank you!
mecitmuratkaya@gmail.com
LBRY Tags: mmk 342; 7.65; 32 acp; 3d print; 3d gun
This model is separated version of the MMK 342. Barrel, Upper Receiver and Lower Receiver are seperated from the Frame part to keep it replaceable.
I am looking for cooperations & partnership or business opportunity to create legalized manufacturing, this model is another example for low cost production.
- This model prepared for .32 ACP(7.65 mm) ammunition, tolerances has been given, but haven't tested, remains as a prototype at this moment.
! RISKS ARE YOUR OWN IF YOU'RE GOING TO TEST THIS MODEL !
- After printing all of the parts(14 parts), you need 4 spring(for trigger, trigger holder, striker, magazine) then ready to go.
- This is an open bolt action, if the magazine is loaded and striker was pulled, it will be ready to fire.
- Two Barrel Connector Pin required.
- Two Receiver Connector Pin required.
- This model can be converted to rifle.
- Barrel and Lower Receiver printable with bigger nozzle without support (0.8, 1 or 1.2 mm)
- For striker part, Nylon+CF or PC filament recommended.
You can reach me via message, twitter or e-mail, Thank you!
mecitmuratkaya@gmail.com
LBRY Tags: mmk 342; 7.65; 32 acp; 3d print; 3d gun
Related to This Release
1206
34
AWCY Turkey Vulture BETA
This is a bolt action takedown rifle with hot swappable barrels, optics that stay mounted to the barrel, short throw bolt, lever actuated primary ext…
339
12
Elevator Man Open Beta
The Elevator Man, a G2C/G3C pistol thingamabob
It uses Fosscannon documentation as of now
Brace has no specific parameters as to how it needs to be p…
600
6
9mm Colt 1911 Pistol
solidworks and step
145
4
2011-G3 betaRX9
for the Taurus G3 fullsize.
LBRY Tags: 2a; printable arms; guns; pistol; c:disable-slimes-video
18
Sentinel_Rotary_Fire_Pepper_Box
this is the original CAD for the Sentinel Rotary Fire Pepper Box Pistol 3d printable pistol.
Credit to Yoshitomo Imura, the designer. Manufacturer Im…
Twitter
Matrix
Source
