509
15
M70 Picatinny Buttstock Adaptor: FFFTech/FFFTechnology
A 4 slot picatinny adaptor for Zastava (AKA Yugo) M70 AK variants.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Material Flow: 100%
Support Material Percentage: 16%
Hardware Needed:
1x M8x30 Bolt, 1mm fine thread pitch (NOT 1.25mm)
1x M8 Washer, 15mm OD (Optional)
2x M4x12mm (Or M4x15mm) Bolts
2x M4 Nuts
LBRY Tags: 3d printing; ak; firearms; m70; picatinny
A 4 slot picatinny adaptor for Zastava (AKA Yugo) M70 AK variants.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Material Flow: 100%
Support Material Percentage: 16%
Hardware Needed:
1x M8x30 Bolt, 1mm fine thread pitch (NOT 1.25mm)
1x M8 Washer, 15mm OD (Optional)
2x M4x12mm (Or M4x15mm) Bolts
2x M4 Nuts
LBRY Tags: 3d printing; ak; firearms; m70; picatinny
Related to This Release
1002
31
FamAR15 SMG 'Commando' Kit
These are alternate compact parts for the FamAR15 and the shorter 10" version of the same Wraith handguard.
I recommend using a solder iron to weld …
1218
16
Spooky Scary Grip (AR-15)
Spooky Scary Grip (AR-15): Laffs Dynamics
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Pri…
846
17
Typewriter M-Lok AFG
Typewriter M-Lok AFG: FFFTech/FFFTechnology
An M-Lok angled foregrip, similar size and overall geometry as the Thompson Model 1928's foregrip.
Req…
308
19
FBS-4 (AKM) V1.0.1
FBS-4 (AKM) V1.0.1: Laffs Dynamics
Fixed stock for AKMs, designed to mimic the aesthetics and feel of original RPK LMG buttstocks.
Printer Used:…
139
4
Apple Pie DMR Stock
Per Request, a DMR Stock for the Apple Pie Pump action AR platform.
This is a variation of a design I have used successfully; but this is not a buil…
Twitter
Matrix
Source
