76
6
View this release
Alternative links
This is a JMAC (and compatible ) minimalist cheek rest for the JMAC Custom brace/stock. This model has 2 styles, but also has the f3d file so if you want to modify it yourself, feel free!
one has an attachable “bumper”, this is just if you want to print different materials/colors. see the 3mf for print orientation.
the other one (labeled “SOLID” ) is just one unit.
printing / assembly :
print any resolution/size nozzle. the height/width doesn't matter too much.
infill also doesn't matter much… just try to stay above 10%
use supports. especially on the main cheekrest. you'll want the bottom supported (i don't like printing it on it's top… the curves result in bad layer lines)
for the bumper rest, print with the holes down on the bed
the bumper should be superglued on. (i've used it with GLOOP. almost impossible to take off)
BOM - you'll need m4 screws with an angled head flat head. any M4x4+ will do. i use M4x6
one has an attachable “bumper”, this is just if you want to print different materials/colors. see the 3mf for print orientation.
the other one (labeled “SOLID” ) is just one unit.
printing / assembly :
print any resolution/size nozzle. the height/width doesn't matter too much.
infill also doesn't matter much… just try to stay above 10%
use supports. especially on the main cheekrest. you'll want the bottom supported (i don't like printing it on it's top… the curves result in bad layer lines)
for the bumper rest, print with the holes down on the bed
the bumper should be superglued on. (i've used it with GLOOP. almost impossible to take off)
BOM - you'll need m4 screws with an angled head flat head. any M4x4+ will do. i use M4x6
Related to This Release
304
9
DooHickey Sling Mount- kickster pic rail version
Added a 3 slot pic rail to the DooHickey Sling Mount
497
16
furikake v1.5 11.5" & 16" shroud (beta)
these 2 shrouds are compatible with all hardware from the main release just intended to give the longer barreled uppers a place to live
174
2
COX CUM Battery Holder M-Lok
So the CUX CUM has both a helmet and a rifle mount, but I have not seen a way to mount the battery pack to a rifle, had some free time and decided to…
124
2
Rossi Brawler Foregrip 2 shot mag
Extended foregrip for the Rossi Brawler. Holds a pair of 45 Colt rounds.
157
6
NAK9/PAK9 fixed Sten magazine Adapter V1.0 "Ducky"
Requires 1x 10-32 screw and nut.
Works in Gen 1 NAK9's and PAK9's and all versions of the RAK9 and WASR-M
The overall goal of this is to give mysel…
Twitter
Matrix
Source
