446
11
This is my design for paddle cutouts on the Harlot. Somebody already made similar using Cabfare paddles, but I felt this needed improvement. The frames I print at 6 Bottom Layers, 40% infill, 4 Top Layers, and 6 walls all at 0.2mm layer height. The paddles included are blank(no stipling). I set up Cura to use infill as stipling by printing 6 bottom layers, 6 walls, and printing zero(0) top layer and infill line multiplier of 2x, all at 0.16mm layer height.
Enjoy,
-Apparition Arms
LBRY Tags: 3d2a; cabfare; fmda; harlot
430
10
10 22 Barrel Shroud with Barrel Band
This is a Barrel shroud for the Ruger 10/22 that is secured by the barrel band.
LBRY Tags: 3d printing; ruger; 10/22; 310_2a
257
5
1
UFA Compliant Compact Striker Fired Artillery Boi
These files and instructions will allow you to build a short (3.5" barrel) striker fired harlet with an artillery bio action, that also contains ove…
247
5
5032A presents harlot brace
a pistol brace designed for harlot .22
80
3
Taurus tx22 1.5 oz weighted tall sight
V2 of the weighted sight, this shorter model allows you to remove your barrel with it still attached for cleaning. The front bolt still partially blo…
Twitter
Matrix
Source
