Looking for a case to finish off your Harlot 22 build? Well, here it is! Originally found on Thingiverse. I did not create this or own any rights to it.
Per the creator (ezcorer):
Print the latch at 100% infill.
You will need:
2 - M3 x 18 button head machine screws (for the hinge)
2 - M3 x 23 or 25 button head machine screws (for the latch and the latch catch)
LBRY Tags: harlot; harlot22; case; 3dprinting; ezcorer
u/Exotic_Clerk892 · 2023-06-27 16:43:51 UTC · score 1
Someone correct me if I'm wrong...
Yes ....6mm pipe will work for a single fire Harlot but won't extract properly/at all if used in EZ22 OR HD22.
The case will expand too much and get stuck in the 6mm ID pipe.
Chime in please....
u/bushworked711 · 2025-04-27 15:29:16 UTC · score 1
They're not perfect, but not nearly as unsafe as people claim they are. The V2 and up have a pretty safe failure mode as well.
If it is built well, and you stick to standard velocity ammo, you will likely have no case ruptures. I have a couple hundred rounds on several different harlot builds.
…
u/phaze-three · 2025-04-02 07:16:53 UTC · score 3
3 rounds in first harlot from 2022 using a 65mm barrel. It was garbage, latch totally opened up & if it didn't, it opened up slightly & case budged. Totally unreliable. 2nd harlot I addressed the issues by making my own external latch & metal breach & easily 300+ HV rounds through it. It's still a bad …
The Dickbutt Harlot
harlot spring insert
Harlot Display Box
Twitter
Matrix
Source
