31
2
View this release
Alternative links
Harbor Freight SKU: 93424
Punch Set Cost (as of 8/22/2025): $8.99 USD
Punch Set Sizes: 5/16", 1/4", 7/32", 3/16", 5/32", 1/8", 3/32", 1/16"
Should be enough slop in case there is variation from my specific set, but if not, I've included CAD.
Enjoy!
LBRY Tags: harbor freight; punch set; 5s; tool block; 93424
Punch Set Cost (as of 8/22/2025): $8.99 USD
Punch Set Sizes: 5/16", 1/4", 7/32", 3/16", 5/32", 1/8", 3/32", 1/16"
Should be enough slop in case there is variation from my specific set, but if not, I've included CAD.
Enjoy!
LBRY Tags: harbor freight; punch set; 5s; tool block; 93424
Related to This Release
10
Home Depot Surge Protector Mount
=======================================
Surge Protector
=======================================
Surge Protector Vendor: Home Depot
Price (as of 8/22/…
14
1
DeWalt DCB107 Charger Magnetic Mount
DeWalt 12V/20V Charger PN: DCB107
McMaster Hardware: (4x) 5862K104 1/8" thick, 3/8" OD Neodymium Magnet
Print the hanger screw with as low of a lay…
190
8
HitchHiker Rifle Length Barrel Alignment Tool
A quick alignment jig that goes around the storage lug. its the same height as the sights so you can press everything down on a flat surface to align…
365
18
SlingKontrol v1.1 (3D Printed Sling Keeper)
Sling Kontrol V1.1 "by" Qwerm
A shameless ripoff of Subrev's Sling Control, a picatinny accessory that helps store your sling when not using your ri…
135
6
RBC-9 Pre supported belt link
Just what the title says. I designed a belt link that does not need additional support and that just pops off after printing. I was using a .4mm nozz…
Twitter
Matrix
Source
