350
8
View this release
Alternative links
This bolt should be able to cram some lead and get a heavier bolt..
Seal back of bolt with J/b weld (which is recommended) or use melted pla
There is a possibility of having too heavy of a bolt and cause cycling n feeding issues.. If so try lighting bolt spring tension.(Or drill into back with a bigger dia drill to lighten bolt.)
PRINT
( orientation should be with bolt face faced to bed)
Layer Height .16-.2
Walls 5-8
Infill 100%
Support could be everywhere or bed only
Adhesion none-brim or even raft if need be.
Any questions feel free to ask..
Seal back of bolt with J/b weld (which is recommended) or use melted pla
There is a possibility of having too heavy of a bolt and cause cycling n feeding issues.. If so try lighting bolt spring tension.(Or drill into back with a bigger dia drill to lighten bolt.)
( orientation should be with bolt face faced to bed)
Layer Height .16-.2
Walls 5-8
Infill 100%
Support could be everywhere or bed only
Adhesion none-brim or even raft if need be.
Any questions feel free to ask..
Related to This Release
397
10
hd22c BOLT HEAVY
THIS REMIX HAS BEEN TESTED BY ME THE DEV>> For more room to stuff bullet tips to make an heavier bolt....
print breech face down on bed... (should b…
676
7
hd22c sbr
JUST A DESIGN -NO TESTS HAVE BEEN DONE WITH THIS COMBO. OF PARTS-
145
1
HD22c-Correct-Nut
TESTED BY ME - ALL FILES STEP AND STL
PRINT
Threads up
3-5 Walls
No Supports Needed
Brim or Raft
246
7
Correct Barrel nut hd22c
tested only once by me because it hasnt broke yet..lol
print with threads up and no support
.1-.2 layer height
100 infill
5-8 walls
skirt ....or bri…
149
5
hd22c double pic handguard
For hd22c print front faced down..
5 walls
100 infill
brim or skirt
remixed from plastic blasters HD22C check him out for other like 22's
Twitter
Matrix
Source
