940
12
View this release
Alternative links
I really want more .45 designs out there!!! I'm just trying to do my part... so... here's a shitty(but working!!) pdw chassis and mag holder/foregrip!
Original G21/20 file from Issho Kaizen and Digital Nimbus.
I didnt write a read me so I'll a do rundown here :)
-glock 45/10mm lpk and locking block needed.
-I used fmda17.2 rails from riptide. The front rail needed to be chamfered for barrel clearance on the inside of the upper edges. install slide without recoil spring to see where and how much you need to file, if at all. if you need help ask for pics.
-m3 screws and heat inserts and nuts for foregrip/mag holder and chassis.
-custom made pin or m3 screw cut to length(~35mm) for rear trigger pack pin. Pin is better because you dont want any movement in trigger pack ;)
-~6mmW x20mmL lightweight spring for mag release on mag holder. I have a variety pack so the one i used is just some random spring that fit.
Good luck and happy printing :)
LBRY Tags: glock; pdw; fosscad; 3d2a; fmda
Original G21/20 file from Issho Kaizen and Digital Nimbus.
I didnt write a read me so I'll a do rundown here :)
-glock 45/10mm lpk and locking block needed.
-I used fmda17.2 rails from riptide. The front rail needed to be chamfered for barrel clearance on the inside of the upper edges. install slide without recoil spring to see where and how much you need to file, if at all. if you need help ask for pics.
-m3 screws and heat inserts and nuts for foregrip/mag holder and chassis.
-custom made pin or m3 screw cut to length(~35mm) for rear trigger pack pin. Pin is better because you dont want any movement in trigger pack ;)
-~6mmW x20mmL lightweight spring for mag release on mag holder. I have a variety pack so the one i used is just some random spring that fit.
Good luck and happy printing :)
LBRY Tags: glock; pdw; fosscad; 3d2a; fmda
Related to This Release
433
4
Corser 9 PDW G26
FMDA DD19.2 v19.3 Remix: Corser 9 PDW G26
-Takes G26 Gen.3 Slides(and .40cal variants)
-Takes Gen.5 Take Down Spring
-Front Picatinny Added
-Further…
2010
19
19.90 PDW Foldi Boi
@Pushin_P.L.A. gets all the credit for this one! I just made it do foldi things. I also included two stocks and 1 brace option. Added bonus, I threw …
847
8
BETA: g30x gen 5 grips
this is a glock 30 that uses glock 21 magazines. it uses gen 3 slides and internals. it requires dd26.2 rails.
this is a beta and is sill buggy. i m…
388
11
ALPHA: g19 dd19.2 PDW system
this is a g45-19x style PDW. it uses dd19.2 style rails and gen 3 internals. the mag release is a custom extended version that has to be printed.
th…
518
9
Glock 26 Chassis v1.1
This is a chassis that will fit a Glock 26 Gen 3. The Gen 3 Glock 26 does not have an accessory rail so it has to mount differently to a chassis with…
Twitter
Matrix
Source
