65
1
View this release
Alternative links
this is the shroud set is based on the FGC-9 MKII shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker.
to complete this build do you need to use the FGC-68 set and part of the FGC-9 and parts of the Tippmann Tipx marker
the starter set for the FGC68 can be found here:
https://www.printables.com/model/87803-fgc-68-base-package-starter-set-for-tipx-tcr-magfe
MKII upper TOP rail version (normal MKII version)
https://www.printables.com/model/87752-fgc-68-mkii-upper-set
the MKII low rail uppers can be found here:
https://www.printables.com/model/177737-fgc-68-mkii-low-rail-upper-set
this low rail right is the same hight as for the new FGC9/FGC6 MKI/MKII rails that I have made.
the FGC68 MKI low rail was in a different hight.
for now the low rail shrouds are a bit limited in there options. but this will chance later in this year. for both the FGC68, FGC6 and FGC9
in case you don’t want to wait of manual update a already printed shroud just fallow the steps in this video.
https://www.youtube.com/watch?v=480iDroe8h0
https://www.printables.com/model/176422-unw-fgc9-fgc6-fgc68-mkii-diy-low-rail-on-unw-shrou
materials needed:
for the front of the shroud
1x M3 bolt 20mm long or up to 26mm
for on the top rail
4x M3 bolt 20mm long
LBRY Tags: paintball; magfed; fgc-68; fgc-68 mkii; tippmann tipx
to complete this build do you need to use the FGC-68 set and part of the FGC-9 and parts of the Tippmann Tipx marker
the starter set for the FGC68 can be found here:
https://www.printables.com/model/87803-fgc-68-base-package-starter-set-for-tipx-tcr-magfe
MKII upper TOP rail version (normal MKII version)
https://www.printables.com/model/87752-fgc-68-mkii-upper-set
the MKII low rail uppers can be found here:
https://www.printables.com/model/177737-fgc-68-mkii-low-rail-upper-set
this low rail right is the same hight as for the new FGC9/FGC6 MKI/MKII rails that I have made.
the FGC68 MKI low rail was in a different hight.
for now the low rail shrouds are a bit limited in there options. but this will chance later in this year. for both the FGC68, FGC6 and FGC9
in case you don’t want to wait of manual update a already printed shroud just fallow the steps in this video.
https://www.youtube.com/watch?v=480iDroe8h0
https://www.printables.com/model/176422-unw-fgc9-fgc6-fgc68-mkii-diy-low-rail-on-unw-shrou
materials needed:
for the front of the shroud
1x M3 bolt 20mm long or up to 26mm
for on the top rail
4x M3 bolt 20mm long
LBRY Tags: paintball; magfed; fgc-68; fgc-68 mkii; tippmann tipx
Related to This Release
64
FGC68-MKII UNW227 SLIM shroud for your magfed paintball marker
I have updated it to a V2 model this will add 1 extra bolt hole so the rail is stronger
--
this is the shroud set is based on the FGC-9 MKII shroud…
62
1
FGC68-MKII UNW300 SLIM shroud for your magfed paintball marker
I have updated it to a V2 model this will add 2 bolt holes so the rail is stronger
-
this is the shroud set is based on the FGC-9 MKII shroud models.…
42
3
FGC-68 MKII UNW370 top rail and low rail shroud set
this is the shroud set is based on the FGC-9 MKII shroud models. but these are modded to accept paintball barrels. in this collection is a set of dif…
278
5
FGC9-MKII MKIISD UNW227 SLIM shroud FGC6-MKII
I have updated it to a V2 model this will add 1 extra bolt hole so the rail is stronger
--
these MKIISD shroud models will work on the MKII platfor…
84
FGC68-MKI UNW163 227, 300 SLIM shroud set for your magfed paintball marker
this is the shroud set is based on the FGC-9 MKI shroud models. but these are modded to accept paintball barrels. in this collection is a set of diff…
Twitter
Matrix
Source
