99
12
Have extra buffer tubes laying arround? Put them to use in this EmSix folding brace remix.
0, 5, and 10 degree angled versions included.
I would print these at 45 degree to get the best strength.
Pla Pro/+ or stronger recommended.
Print solid for best results.
Fitment is tight, you will have to thread the tube in and out several times while clearing shavings. Use a castle nut to secure in place.
LBRY Tags: buffer; tube; folding; brace; stock
498
7
CP33 Brace Adapter V1.0
The CP33 Brace Adapter is here!
Included:
-2 brace adapters
-2 braces
-A Safety selector swap
The only hardware needed is the brace kit included at…
299
8
7
KTP Fixed Picatinny Brace
This is the KTP fixed picatinny brace. The file includes the brace itself and the locking mechanism for the rail. It is sized for an M5 bolt, recomme…
115
2
Cursd FCG Reinforcement Plates
Upload the DXF files into Send Cut Send.
Choose Titanium, Grade 5, 0.040" (1mm) for the plates.
Quantity of 2 of each plate.
You'll need anti-walk …
90
Pepper Spray Pistol 2.0
(Please read the print settings post first)
Defend yourself quickly and effectively with the Pepper Spray Pistol 2.0. It is designed so that you can …
Twitter
Matrix
Source
