165
10
Dual 10 Round AR Mag Pouch (REMIX) by Qwerm
A remix of the @FecalDisco:e Double Decker mag pouch that is shorter, allowing it to hold 10 and 20rnd AR15 magazines. The MOLLE attachment was also replaced by a belt hook from @philphisher:0 "PPDS Ghoulster". I also remade the mag pouch models so I was able to include STEP files of those.
Print orientation: Print everything on it's side.
Settings used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.2mm
Wall Line Count: 5
Infill Percentage: 100%
Support: None
Materials Needed:
1/8 Inch Shock Cord
Cord Lock
2x M5x8 Screws
2x M5 Nuts
LBRY Tags: 3d printed; mag pouch; ar15
A remix of the @FecalDisco:e Double Decker mag pouch that is shorter, allowing it to hold 10 and 20rnd AR15 magazines. The MOLLE attachment was also replaced by a belt hook from @philphisher:0 "PPDS Ghoulster". I also remade the mag pouch models so I was able to include STEP files of those.
Print orientation: Print everything on it's side.
Settings used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.2mm
Wall Line Count: 5
Infill Percentage: 100%
Support: None
Materials Needed:
1/8 Inch Shock Cord
Cord Lock
2x M5x8 Screws
2x M5 Nuts
LBRY Tags: 3d printed; mag pouch; ar15
Related to This Release
450
12
CAR15 Style Brace
This is a brace that is inspired by the CAR15 stock. It fits a standard carbine length tube. The hardware recommended is a cap head M5 bolt 45mm OAL…
214
7
1
M2 SLAM MODEL 1:1 MARKED INERT
This is a separate model of the M2 SLAM mine that is marked INERT in 15mm tall font on the font of the unit. This model would be a more appropriate t…
113
3
AR FCG pocket mold
Step files to use as a cutting tool for making AR FCG pockets. Made using BLC M16 firearm reference model. One is just the pocket, the other has a …
97
3
Carry Handle, RDB - V3.3 Public Release - DINGO
I've been asked to release this carry handle, so here goes. It's built around some DD style sights and I make no guarantees it will fit your sights. …
79
2
tramshpamda's side mounted mlok bipod v2
my attempt at creating a printed bipod with adjustable legs that mount onto the side m-lok rail segments of a rifle. this is absolutly a beta, and th…
Twitter
Matrix
Source
