4601
34
View this release
Alternative links
The DB Alloy Lage Edition allows for the use of the Lage semi-automatic upper receivers in the DB9 Alloy. Some variation is in place from the original DB9 Alloy. Specifically, the following differences exist:
1. The side plates are different to contour the Lage upper. You will need to order new side plates via sendcutsend or another provider.
2. The lower receivers have the front bottom rail removed.
3. The rear insert has been modified to slot into the lage upper
4. The front insert has had the bottom rail removed.
5. The Glock feed ramp has been modified to slot into the Lage upper. If you are using a metal feed ramp you will need to file the sides of the ramp until it fits in the upper.
Hardware kits available at dbdesignworks.com
LBRY Tags: lage; db9 alloy; 3d printing; guncad; mac
1. The side plates are different to contour the Lage upper. You will need to order new side plates via sendcutsend or another provider.
2. The lower receivers have the front bottom rail removed.
3. The rear insert has been modified to slot into the lage upper
4. The front insert has had the bottom rail removed.
5. The Glock feed ramp has been modified to slot into the Lage upper. If you are using a metal feed ramp you will need to file the sides of the ramp until it fits in the upper.
Hardware kits available at dbdesignworks.com
LBRY Tags: lage; db9 alloy; 3d printing; guncad; mac
Related to This Release
4049
36
MP22_ImortalRevolt Mod
Are you thinking about filing out a form 1, but don't know what for?? Well look no further friends! Modded by ImmortalRevolt from the original Mp22, …
598
8
SS DB Alloy Buttercup Brace Rear Trunnion
Reddit request for the Buttercup Brace to be modified to work with the SS DB Alloy. You MUST can cut it in half in your slicer so you can to print it…
1055
17
HubTN.4 - 30cal (FTN.4 remix, v3)
I've tested this a fair amount up to semiauto 308 (vid on reddit) but it's still a beta design until many more have as well. Very interested in what …
379
11
SBT Evo Brace Shims (CZ Scorpion Evo 3)
SBT Evo Brace Shims (CZ Scorpion Evo 3): Laffs Dynamics
A set of three shims to fit between SB Tactical stabilizing braces for CZ Scorpion Evo pisto…
1130
6
18
Ivans Printable 10-22 Receiver V1.1
Ivans Printable 10-22 Receiver V1.1
LBRY Tags: ivans printable 10-22 receiver v1.1; 10-22; gun; 22 lr; gatalogs
Twitter
Matrix
Source
