1200
22
1
View this release
Alternative links
In an effort to increase the working lifetime of the FGC-9 Mk2's printed hammer, as well as significantly reduce the probability of accidental breakages, I have thickened the above-mentioned part to 12,4 mm.
I have also created two versions, one of which is solid, the other of which possesses an orifice for insertion of a 3x40mm screw (the extremity of the screw will, of course, have to be cut off).
The final printed product (with screw inserted) weighs over 7 grams, as opposed to the original, which weighed less than 4 grams.
Please note that this hammer is not backwards-compatible with the FGC-9's original bolt housing, and so a modified version of the housing with a 13mm-wide rear slot has been provided.
LBRY Tags: fosscad; fgc-9; 3d printing
I have also created two versions, one of which is solid, the other of which possesses an orifice for insertion of a 3x40mm screw (the extremity of the screw will, of course, have to be cut off).
The final printed product (with screw inserted) weighs over 7 grams, as opposed to the original, which weighed less than 4 grams.
Please note that this hammer is not backwards-compatible with the FGC-9's original bolt housing, and so a modified version of the housing with a 13mm-wide rear slot has been provided.
LBRY Tags: fosscad; fgc-9; 3d printing
Related to This Release
296
3
3D files for the MNF9 buffer tube and shock variants
No description provided for this release
LBRY Tags: mnf9; mod9; fgc9; guncad
90
2
FGC-9 MKII UNW370 shroud LR (Low rail) Mini 1/3 1/4 1/6 scale
TURN ON: Print Tiny walls! I did my best, but it was really time consuming to make it totally solid in the inside... so some walls are tiny depending…
171
4
Fcg9 mk2 barrel retainer with foregrip and picatinny rail
A FCG9 Mk2 handle with picatinny
credit for the original handle design
goes to UntangleWORKS on Printables
LBRY Tags: gatz
86
3
FGC-9 MKII UNW163 shroud LR (Low rail) Mini 1/3 1/4 1/6 scale
TURN ON: Print Tiny walls! I did my best, but it was really time consuming to make it totally solid in the inside... so some walls are tiny depending…
861
10
1
@MiddletonMade's HotPocket Charging Handle and Chassis Mount mods for Glock 19
These mods for the HotPocket carbine kit adapt the original to accept a Glock 19 much more easily. Some filing of the mount mating surface necessary …
Twitter
Matrix
Source
