146
3
Special Thanks to JoJoMasterson as they made the original model this was based on. His model was specifically for the HMG Receiver flats.
I made modifications to it so that it only works for the MARCOLMAR receiver flats. I used this to bend my own flat without having to rent the one from MARCOLMAR.
YOU NEED TO MEASURE THE DISTANCE ON BOTH SIDES OF YOUR FLAT BEFORE YOU DO ANY BENDING. These flats are expensive and a mistake is doublely so.
Known issue. The tabs on my flat was not centered on receiver according to my measurements I'm not sure if it was a one-off issue so I left the pin alignment holes centered and used slightly smaller pins to hold the flat in place before I pressed it.
LBRY Tags: cetme l; flat; bending; jig; marcolmar
150
11
Zastava M67 M70 Magazine v3 Follower/ feedlip Update
These magazines are as rare as hens teeth. You practically have to buy another firearm to get another magazine. That is why I have designed a 3d mode…
95
3
Stubbs STG44 multi height front sights
My STG44 was shooting really high so I made taller front sights to zero it. I hope this helps someone.
LBRY Tags: stg44; front sight; stubbs
54
6
1
Zastava M67 M70 Rear Sight
Did your M67/M70 32 acp/7.65mm handgun comes with a crazy tall "sporter" rear sight that cause you to shoot ridiculously high? Well here is a sight t…
46
5
Daisy 2022 Magazine test fit 1
No description provided for this release
LBRY Tags: daisy; 2022; magazine
Twitter
Matrix
Source
