192
12
View this release
Alternative links
Universal Calibration Cube with the following tests built in:
-Stringing
-Overhangs
-Bridging
-Complex shapes
-Half-sphere with no support
-Inner and Outer Holes
-M3, M4, and M5 Nut cutouts
All in a 40 x 40 x 40mm cube.
LBRY Tags: cad; 3d; printing
-Stringing
-Overhangs
-Bridging
-Complex shapes
-Half-sphere with no support
-Inner and Outer Holes
-M3, M4, and M5 Nut cutouts
All in a 40 x 40 x 40mm cube.
LBRY Tags: cad; 3d; printing
Related to This Release
33
1
sacred geometry cura profile
my cura settings including fuzzy skin settimgs... please be sure to check infill and walls to taylor to your print.. as well as top/ bottom layers wh…
144
3
Super Selector selector Pack
7 selectors designed to be used with the atrius super selector
LBRY Tags: 3d2a; 2a; selector; super selektor
17
1
TR-50 slug pack
In this pack are 5 basic slugs I designed & experimented with for use in the Umarex TR-50 launcher. Included are : Chunky- a basic featureless poin…
1607
43
FSP STEP TOOLBOX
From the RFRD comes the step for the FSP-17! Mix, match, and create your ultimate pistol using the toolbox!
44
6
EyeZeeEye 100 mm calibration Print
This is a 100mm Calibration print to be used just like a calibration cube. I use 15% lighting infill and only 2 walls for this print.
LBRY Tags: …
Twitter
Matrix
Source
