198
9
This lets you stuff a beretta 92 magazine into an AR15 with minimum effort on my part. Use the printed ejector to trace out on one on 1/16-3/32" sheet steel, and cut it out with your favorite metalworking tools. The part is held together with #4-40 socket cap head screws. Use 3x #4-40 x 1/4" screws to hold the ejector on, and 4x #4-40 x 1/2" or longer screws to hold the two halves of the adapter onto the magazine. The magazine is held securely in the adapter, and has to be reloaded in place unless you want to take the screws out.
I can confirm this is a working design. You may need to custom fit the ejector to your bolt.
LBRY Tags: ar-9; ar15; beretta; magazine; fosscad
I can confirm this is a working design. You may need to custom fit the ejector to your bolt.
LBRY Tags: ar-9; ar15; beretta; magazine; fosscad
Related to This Release
1321
28
Onion AR15 lower Glock AR9 magazine adapter
Insert for Glock mags to fit AR15 lower. Tested with CMMG Banshee upper. Tolerances of around 0.2mm
LBRY Tags: ar9; adapter; glock; magazine
285
7
Lil Piglet Magazine Buttstock V3 Shorter LOP
Builds on the previous designs, incorporating feedback from @Heythere79:b the lop is shortened and some geometry has been tweaked.
If you already hav…
185
12
CMMG AR-15 22LR Single Stack Magazine
Here's my take on printable AR-15 22LR magazines for CMMG conversion kit and similar. The project started way back in 2018 and has been put on hold d…
127
5
AR-15 DB9 Alloy Magazine Adapter
Check the readme. Just a little adapter I whipped up, figured I'd breathe some life into these magazines I have collecting dust.
LBRY Tags: 3d2a; db…
102
7
CMMG AR-22 Buffer Plug v2
A plug designed to be inserted into buffer plug of AR-15 with CMMG 22LR conversions to keep said conversion pushed forward, increasing its reliabilit…
Twitter
Matrix
Source
