1526
30
View this release
Alternative links
AR-VAL 3D-printable stock, will require a printer with at minimum 330mm of Z-axis travel for tested print configuration.
Designed to be printed as 1 single piece, will require additional components:
1x M10x200mm threaded rod
1x M10 cap nut
1x M6x16 point-tip grub screw
1x MAGPUL PRSII Recoil pad
2x 1/4-20 x 5/8" Flathead bolts
This work is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/ or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA.
Designed to be printed as 1 single piece, will require additional components:
1x M10x200mm threaded rod
1x M10 cap nut
1x M6x16 point-tip grub screw
1x MAGPUL PRSII Recoil pad
2x 1/4-20 x 5/8" Flathead bolts
This work is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/ or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA.
Related to This Release
1225
22
AR-VAL 3D-Printable Grip
AR-VAL 3D-printable grip, designed for use with free float tube handguards with OD 1.99″
Designed to be printed as 1 single piece, will require addit…
1301
26
AR-VAL 3D-Printable stock REMIX
Original by Ocean Juice Designs: https://open.lbry.com/@OceanJuice:5/ARVAL-Release-Folder:3
This is a remix of his design. This stock is compatible w…
532
23
Carophylactic_15_V1.00 CAR 15 / XM177 Stock
3D printable CAR 15 stock that requires minimal hardware. Great for budget retro build
65
8
FXFT 3 Note Sight System Public Beta
FXFT Designs presents the 3 Note Sight System public beta. This is another attempt to poke fun at Mark Larue and his C-Note design. It is a sight sys…
179
5
3D Printed AR Charging Handle Extension - Files
WTD-1061 and WTD-1062 are AR-15 charging handle extensions (two different designs, not used together) that are installed over a standard Milspec char…
Twitter
Matrix
Source
