This is a remix of Hoffman Tacticals' AR-15 lower (V2.6) into an AR-9 platform. It uses a traditional Ejector, not like the custom ones found in previous 3d printed options.
Hardware needed:
1x 2'' Hose Clamp
2x 5mmx30mm Socket Bolts (+nuts) for the front take down brackets (https://www.boltdepot.com/Product-Details.aspx?product=6525)
1x 3/32'' diameter rod for the Roll Pin on the Bolt Catch and for the Magazine Release. you only need about 3-4 inches ( I get mine at Lowes, they sell it as "Assorted Piano Wire")
2x 2.5x20mm socket bolts (+nuts) for the Ejector
Happy Printing!
LBRY Tags: 3d print; ar-9; hoffman tactical
u/Lower_Magician_3691 · 2021-11-02 23:09:27 UTC · score 1
Check this out someone just put me up on Hoffman- U Bolt had a 9mm midget mutant hybridMix Breed
u/Lower_Magician_3691 · 2021-11-02 23:06:01 UTC · score 2
Hoffman-U bolt had a a 9 mm midget I know what I’m going with for my recently new purchasesMixed Breed
AR-9 Super Lower V1.2
Hoffman Tactical AR-9 Super Lower
DD17.2 Rear Frame Fix
Twitter
Matrix
Source
