1028
22
View this release
Alternative links
AGH MY SKELETONIZED NECK Mini Grip (AR-15): Laffs Dynamics
I warned ya in the original release I'd finish the job! Snapped my neck and now I'm a spooky bone rattle boi!
Skeletonized variant of the original AGH MY NECK Mini Grip.
Front to Back Length: ~50mm (Excluding top grip mounting section.)
Side to Side Width: Swells from 22.32mm out to 30.70mm
Top to Bottom Height: 92.94mm
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm - .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
LBRY Tags: 3d printing; firearms; grip; ar15; skeletonized
I warned ya in the original release I'd finish the job! Snapped my neck and now I'm a spooky bone rattle boi!
Skeletonized variant of the original AGH MY NECK Mini Grip.
Front to Back Length: ~50mm (Excluding top grip mounting section.)
Side to Side Width: Swells from 22.32mm out to 30.70mm
Top to Bottom Height: 92.94mm
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm - .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
LBRY Tags: 3d printing; firearms; grip; ar15; skeletonized
Related to This Release
1084
22
DB Slab AR Grips by DB Firearms
These are two low poly grips for AR patterned firearms. The standard grip is longer for big hands and the mini grip is quite a bit
shorter for smalle…
837
17
1
Strike 90 K Grip (AR-15)
Strike 90 K Grip (AR-15): FFFTech/FFFTechnology
Compact variant of the original Laffs Dynamics Strike 90 AR-15 Grip. A 0°/90° angled grip designed f…
894
25
Unnamed Prototype Zenitco PKM Inspired AR Stock
This is a yet unnamed prototype stock for an ar15 inspired by the zenitco PKM stock.
The addition of a rear grip surface makes shooting a light mach…
1544
27
Spooky Scary Skeletonized Grip (AR-15)
Spooky Scary Skeletonized Grip (AR-15): Laffs Dynamics
Just in time for the bone rattling season, this spooky "ghost gun" grip is... well it's frank…
428
14
V01D Grip (3DP PCC)
V01D Grip (3DP PCC): FFFTech/FFFTechnology
The original 3FTech V01D Grip, adapted to work with 3D printed pistol caliber carbines.
Mounts to:
* M…
Twitter
Matrix
Source
