1143
14
View this release
Alternative links
This is a 2-piece adapter based off the Griffin Armament A2 adapter for attaching your *legally built* Saturn Suppressor (https://odysee.com/@TheGatalog-Suppressors:a/Saturn-Suppressor-System:b) to an A2 birdcage flash hider. Print the Lock and Threads vertical, with only 85 degree tree supports on both. The Hexlock may be printed in it's sideways orientation and may help with strength, but is harder to initially thread together. It uses 75 degree tree supports, and may need to have a file run through the threads before you assemble. Note: this is only rated for .22lr as of now, but the Hexlock *may* survive single 5.56 shots out of a long (20"+) barrel (untested as of now).
Assembly: the Lock fits around the A2 flash hider, with the two half-rings at the bottom fitting into the two grooves around the flash hider's base. The top of the Threads (as printed) screws flush into the suppressor, and the threads at the bottom (tapered part facing down) screws not flush into the Lock. Screw it down until snug, don't overtighten. You should still be able to twist the entire assembly around the flash hider with a little bit of force.
As with all suppressors, make sure your bore is concentric. While you won't necessarily need shims instead of a crush washer on your A2 flash hider, it may solve concentricity issues.
LBRY Tags: guns; 3d printing
Assembly: the Lock fits around the A2 flash hider, with the two half-rings at the bottom fitting into the two grooves around the flash hider's base. The top of the Threads (as printed) screws flush into the suppressor, and the threads at the bottom (tapered part facing down) screws not flush into the Lock. Screw it down until snug, don't overtighten. You should still be able to twist the entire assembly around the flash hider with a little bit of force.
As with all suppressors, make sure your bore is concentric. While you won't necessarily need shims instead of a crush washer on your A2 flash hider, it may solve concentricity issues.
LBRY Tags: guns; 3d printing
Related to This Release
378
8
mini 22lr suppressor - liner - epoxy on - text removed
Per request, a defeatured 22lr suppressor based on my mini 22lr suppressor. As before, follow your state/local/federal laws or live in the great stat…
1258
15
H2PE mini 22lr suppressor for 22lr liner
A simple 22 suppressor that is friction fit to 22lr barrel liner (reaming with a drill may be needed if your printer is not accurately tuned). added …
90
4
22 size buff tube hushhush insert 173mm
this fits inside a buffer tube with a little room to spare. wrap 1 layer ( or as many or none as needed) of electrical tape around top middle and bot…
1145
15
Silencer, 22 cal, 26 mm OD, 1/2” UNEF
Our first “test” upload to Odysee is one of our silencer designs which have been available on Cults3d since July 2022. In due course we will copy the…
419
13
Slotted Caged Flash Hider
WARNING!!!!!!! This is only intended to be used with 22lr, use with any other caliber
could result in injury or death, use at your own risk.
use with…
Twitter
Matrix
Source
