221
15
1
A rif on the a2 stock by unseenkiller to let you remove the butpad with a bullet tip or pen
uses a 6mm spring or 1/4 in, 50mm or 2in long mcmastercarr 9657K383
2x short sections of paperclip to retain the spring assembly
2x 91290A171 m3 bolts
To assemble put the bolts in the sleeves and drop it all into the buttpad then press them below flush and cross pin with the paperclip
you can adjust the latch sickout by turning the screws
May want to round the bolt tips with a file
Credit
@unseenkiller:d
https://odysee.com/@unseenkiller:d/Unseenkiller---A2-Multi-Position-Mounted-Fixed-Stock:b
uses a 6mm spring or 1/4 in, 50mm or 2in long mcmastercarr 9657K383
2x short sections of paperclip to retain the spring assembly
2x 91290A171 m3 bolts
To assemble put the bolts in the sleeves and drop it all into the buttpad then press them below flush and cross pin with the paperclip
you can adjust the latch sickout by turning the screws
May want to round the bolt tips with a file
Credit
@unseenkiller:d
https://odysee.com/@unseenkiller:d/Unseenkiller---A2-Multi-Position-Mounted-Fixed-Stock:b
Related to This Release
492
9
AB UL Fixed Stock v4.2
This ar15 stock design is intended for mil-spec carbine buffer tubes. I was in search of a light-weight fixed stock and found that the Magpul MOE car…
273
10
Bidens Bain 3 inch handguard
Here are some 3 inch handguards for the Biden's Bain upper. This is for use with blowback .22 or pistol caliber actions ONLY as there is no port for …
209
9
HitchHiker Three Shot Stock
Added 3 slots for your favorite brand of 22lr into the HitchHiker stock. much faster and convent than opening up the grip or pulling them out of your…
83
3
FREE WILLY - XTRA MAGAZINE STOCK
XTRA MAGAZINE STOCK
LBRY Tags: ar-15; stock; free willy; gun; 3d print
71
2
AR Buffer Tube Alignment Jig
This tool aligns an AR style receiver extension (buffer tube) to the receiver so that the nut can be tightened.
There are two models. A "small" that…
Twitter
Matrix
Source
