View this release
Alternative links
This is the BPNVG single monacle body, and single monacle lens retainer, with the front sensor mount, gasket, and internal parts. Everything needed to make the single sensor unit of the BPNVG.
This device will need:
1x Runcam Night Eagle II Pro (or substitute and shims to fit housing)
1x Adafruit 2" NTSC analog display
1x 38mm diameter 50mm focal distance biconvex lens
M5 hardware set, bolts.
1/4-20 bolt and nut with washers for mount (length dependent on mount)
12v power cable of any style and power source between 6-12v.
There will be more to come, and a fully fleshed out open source release will occurr at the end of this project.https://www.indiegogo.com/projects/bpnvg-bootleg-panoramic-night-vision-goggles/x/28119010#/updates/all
LBRY Tags: bpnvg; nightvision; stubbs; tfb
This device will need:
1x Runcam Night Eagle II Pro (or substitute and shims to fit housing)
1x Adafruit 2" NTSC analog display
1x 38mm diameter 50mm focal distance biconvex lens
M5 hardware set, bolts.
1/4-20 bolt and nut with washers for mount (length dependent on mount)
12v power cable of any style and power source between 6-12v.
There will be more to come, and a fully fleshed out open source release will occurr at the end of this project.https://www.indiegogo.com/projects/bpnvg-bootleg-panoramic-night-vision-goggles/x/28119010#/updates/all
LBRY Tags: bpnvg; nightvision; stubbs; tfb