View this release
Alternative links
FBS-2 (AKM) (Rev 1): Laffs Dynamics
Revision of the original Laffs Dynamics FBS-2 AKM Buttstock. Follows the original's design parameter of a higher cheek comb for use
with mounted optics.
This revision is much more aesthetically pleasing, and is much easier to print and assemble.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 5+
Infill: 32%
Support Material Percentage: 18%
Hardware Needed:
2x M4x10mm - M4x15mm Screws
LBRY Tags: 3d printing; firearms; akm; ak; buttstock
Revision of the original Laffs Dynamics FBS-2 AKM Buttstock. Follows the original's design parameter of a higher cheek comb for use
with mounted optics.
This revision is much more aesthetically pleasing, and is much easier to print and assemble.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 5+
Infill: 32%
Support Material Percentage: 18%
Hardware Needed:
2x M4x10mm - M4x15mm Screws
LBRY Tags: 3d printing; firearms; akm; ak; buttstock