View this release
Alternative links
D.R.U.M. Reinforced Mag Body: Laffs Dynamics
Mag drum body for the DMB D.R.U.M. Magazine, reinforced externally and internally to better withstand impacts from dropping onto hard
surfaces.
Material around the modular magazine feed tower has been thickened as well.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 55%+
Support Material Percentage: 20%
Print the cover on it front face.
Notes:
1) This data pack is just for printing the primary magazine body. To get the base magazine data pack, use the following link:
(https://odysee.com/@AreWeCoolYet:7/DannysDrumMags)
Accreditations:
Danny Meatball: Creator of the DMB Co. D.R.U.M. Magazine. Used the base model of his mag body geometry for this design.
LBRY Tags: 3d printing; firearms; drum; reinforced; magazine
Mag drum body for the DMB D.R.U.M. Magazine, reinforced externally and internally to better withstand impacts from dropping onto hard
surfaces.
Material around the modular magazine feed tower has been thickened as well.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 55%+
Support Material Percentage: 20%
Print the cover on it front face.
Notes:
1) This data pack is just for printing the primary magazine body. To get the base magazine data pack, use the following link:
(https://odysee.com/@AreWeCoolYet:7/DannysDrumMags)
Accreditations:
Danny Meatball: Creator of the DMB Co. D.R.U.M. Magazine. Used the base model of his mag body geometry for this design.
LBRY Tags: 3d printing; firearms; drum; reinforced; magazine