View this release
Alternative links
ONLY USE CCI QUIETS or else you will lose your can in one shot!
Did you build a Proto barrel and find yourself with extra CF tubes? This design uses this size of tubes https://www.amazon.com/gp/product/B00TF8V9KI/ and you can replicate the baffles as many as you desire (includes 2 baffle designs and they ALL fit very tight) - for the Special-K baffle the dual holes go towards the threads and the threads and end cap get epoxied onto the CF tube. These will melt eventually and you must ensure everything is aligned before firing - remember to drill out each baffle and the endcap 0.265" is recommended but if your alignment is off you may need more clearance - reducing the clearance will not affect sound very much so go wide before you try and go tight. The purpose is hearing protection for .22 shooting with CCI Quiets aka 710FPS ammo. Fit for all parts will be tight on a properly calibrated printer, you will need to sand things down. I also added a Proto barrel version (Untested) and a Gmetech barrel version to create an internally suppressed option - have fun!
LBRY Tags: 3d printing; cant stop the signal
Did you build a Proto barrel and find yourself with extra CF tubes? This design uses this size of tubes https://www.amazon.com/gp/product/B00TF8V9KI/ and you can replicate the baffles as many as you desire (includes 2 baffle designs and they ALL fit very tight) - for the Special-K baffle the dual holes go towards the threads and the threads and end cap get epoxied onto the CF tube. These will melt eventually and you must ensure everything is aligned before firing - remember to drill out each baffle and the endcap 0.265" is recommended but if your alignment is off you may need more clearance - reducing the clearance will not affect sound very much so go wide before you try and go tight. The purpose is hearing protection for .22 shooting with CCI Quiets aka 710FPS ammo. Fit for all parts will be tight on a properly calibrated printer, you will need to sand things down. I also added a Proto barrel version (Untested) and a Gmetech barrel version to create an internally suppressed option - have fun!
LBRY Tags: 3d printing; cant stop the signal