View this release
Alternative links
Middleton Made Mac N' Cheese Modded Rear Top Cap
This was done to prevent the Mac upper from pivoting off the lower that I was experiencing (without any prints breaking).
Print Settings:
- PLA Pro / Nozzle 220F
- 0.15mm Layer Height / 0.2 Initial Height
- 8-10 Walls
- 99% Infill / Line
- Normal Supports / Only Touching Buildplate
LBRY Tags: middletonmade; macncheese; 3dprinting; guncad; 9mm
This was done to prevent the Mac upper from pivoting off the lower that I was experiencing (without any prints breaking).
Print Settings:
- PLA Pro / Nozzle 220F
- 0.15mm Layer Height / 0.2 Initial Height
- 8-10 Walls
- 99% Infill / Line
- Normal Supports / Only Touching Buildplate
LBRY Tags: middletonmade; macncheese; 3dprinting; guncad; 9mm