View this release
Alternative links
VFG 001 V1.1: Laffs Dynamics
A medium length vertical foregrip with an oblong cross section.
Comes in three variants:
*Standard
*Ridged
*Perforated
Update V1.1: Tightened picatinny rail slot tolerances.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .14mm - .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Print the VFG upside-down.
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm, so it doesn't stick out the side)
1x M4 Hex Nut
LBRY Tags: 3d printing; firearms; foregrip; picatinny; vfg
A medium length vertical foregrip with an oblong cross section.
Comes in three variants:
*Standard
*Ridged
*Perforated
Update V1.1: Tightened picatinny rail slot tolerances.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .14mm - .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Print the VFG upside-down.
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm, so it doesn't stick out the side)
1x M4 Hex Nut
LBRY Tags: 3d printing; firearms; foregrip; picatinny; vfg