View this release
Alternative links
GoldCorp AKM Mag 30: Laffs Dynamics
GoldCorp PMC can be deployed anywhere in the world, at any time. Often when things go south in the Balkans, (As they do.) GoldCorp PMCs
are sent in for "peacekeeping". For when the Blue Helmets just won't do, a single member of GoldCorp with an AK can take on 30 slavs at once!
30rd magazine with GoldCorp PMC labeled on both sides. Has ridging down the spine of the mag body for ease of retention
during reloads.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 7+
Infill: 45%+
Support Material Percentage: 18%
Hardware Needed:
1x 30rd Length AK Mag Spring
1x 30rd Length AR-15 Mag Spring (OPTIONAL)
Parts Installation:
1) Apply cyanoacrylate adhesive inside the pocket for the rear locking lug. If the rear locking lug is slightly loose
in the pocket, apply Clear Gorilla Glue. Wait 24hrs for the adhesive to cure.
2) Insert the rear locking lug, with the angled facet facing outwards, and down towards the mag body's base.
3) Lightly sand the anti-friction follower's sides and curved spine.
4) Slide the top of the magazine spring through the front of the follower, above the spring retention tab.
5) Attach the floorplate to the bottom of the magazine spring, making sure the first spring winding snaps over the
retainers.
6) Slide the internal spring assembly into the magazine body.
7) Depress the floorplate, and slide on the baseplate. The floorplate's locking tab must index with the channel in the
baseplate.
Notes:
1) Bulgarian, Korean, and US based Magpul springs have been tested.
2) Bulgarian Slabside Polymer AK mag followers, floorplates, and baseplates are compatible with the Waco Waffle series of
magazines.
Accreditations:
Dianexis: Design inspired by GoldCorp magazines sold by TheMagProject; a weapon magazine vendor of which the credited individual
runs. Gave permission for the creation of the mag design with the GoldCorp logo and provided logo templates.
Cultivated Laser: Design inspired by GoldCorp magazines sold by TheMagProject; a weapon magazine vendor of which the credited
individual creates designs for via digital imaging and laser engraving.
LBRY Tags: 3d printing; firearms; akm; gold corp pmc; magazine
GoldCorp PMC can be deployed anywhere in the world, at any time. Often when things go south in the Balkans, (As they do.) GoldCorp PMCs
are sent in for "peacekeeping". For when the Blue Helmets just won't do, a single member of GoldCorp with an AK can take on 30 slavs at once!
30rd magazine with GoldCorp PMC labeled on both sides. Has ridging down the spine of the mag body for ease of retention
during reloads.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 7+
Infill: 45%+
Support Material Percentage: 18%
Hardware Needed:
1x 30rd Length AK Mag Spring
1x 30rd Length AR-15 Mag Spring (OPTIONAL)
Parts Installation:
1) Apply cyanoacrylate adhesive inside the pocket for the rear locking lug. If the rear locking lug is slightly loose
in the pocket, apply Clear Gorilla Glue. Wait 24hrs for the adhesive to cure.
2) Insert the rear locking lug, with the angled facet facing outwards, and down towards the mag body's base.
3) Lightly sand the anti-friction follower's sides and curved spine.
4) Slide the top of the magazine spring through the front of the follower, above the spring retention tab.
5) Attach the floorplate to the bottom of the magazine spring, making sure the first spring winding snaps over the
retainers.
6) Slide the internal spring assembly into the magazine body.
7) Depress the floorplate, and slide on the baseplate. The floorplate's locking tab must index with the channel in the
baseplate.
Notes:
1) Bulgarian, Korean, and US based Magpul springs have been tested.
2) Bulgarian Slabside Polymer AK mag followers, floorplates, and baseplates are compatible with the Waco Waffle series of
magazines.
Accreditations:
Dianexis: Design inspired by GoldCorp magazines sold by TheMagProject; a weapon magazine vendor of which the credited individual
runs. Gave permission for the creation of the mag design with the GoldCorp logo and provided logo templates.
Cultivated Laser: Design inspired by GoldCorp magazines sold by TheMagProject; a weapon magazine vendor of which the credited
individual creates designs for via digital imaging and laser engraving.
LBRY Tags: 3d printing; firearms; akm; gold corp pmc; magazine