View this release
Alternative links
UPDATE 1
replaced some weird design stuff with others
fixed issue:
the bolt that holds the upper won't push the upper upward anymore <<-- fixed
BUT the Plate itself will..
some filling down will fix it and will be perfect. <<-- i don't see this as a problem as much as much as a feature to get the perfect size that suits your build.
Redesigned Hoffman lower plate fits best on ez22
About:
this is just piece of plastic i made that holds the ez22 upper to hoffman tactical lower
this one uses screws only.. no pins required since the hole will grip firm enough until you reprint it.
requirements:
3 M6 bolts ( 33 - 32 mm nominal length >> don't measure the head).
[print material]
is PLA+
Print orientation: as the stl is.
support: yes.
Special thanks to hoffman and u/plastic_blasters for their creations.
LBRY Tags: 3dprinting; ez22; hoffman; 22lr
replaced some weird design stuff with others
fixed issue:
the bolt that holds the upper won't push the upper upward anymore <<-- fixed
BUT the Plate itself will..
some filling down will fix it and will be perfect. <<-- i don't see this as a problem as much as much as a feature to get the perfect size that suits your build.
Redesigned Hoffman lower plate fits best on ez22
About:
this is just piece of plastic i made that holds the ez22 upper to hoffman tactical lower
this one uses screws only.. no pins required since the hole will grip firm enough until you reprint it.
requirements:
3 M6 bolts ( 33 - 32 mm nominal length >> don't measure the head).
[print material]
is PLA+
Print orientation: as the stl is.
support: yes.
Special thanks to hoffman and u/plastic_blasters for their creations.
LBRY Tags: 3dprinting; ez22; hoffman; 22lr