View this release
Alternative links
Wayllshine E6 850nm Illuminator Picatinny Mount by Qwerm
An offset picatinny mount for the Wayllshine E6 850nm IR light, a $15 IR illuminator. You can also get it for $10 from Aliexpress [Here](https://s.click.aliexpress.com/e/_mtvyfyQ)
Orientation: Print on it's side.
Settings Used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.20mm
Wall Line Count: 4
Infill Percentage: 30%+
Support: Yes
Support Type: Tree Support
Fuzzy Skin: Disabled
Hardware Needed:
1x M5 30mm Socket Head Screw
2x M5 10mm Socket Head Screw
3x M5 Hex Nut
Credit to FFFTech for the Picatinny mount template.
LBRY Tags: 3d printed; guncad; ir illuminator; light mount; 3dprint
An offset picatinny mount for the Wayllshine E6 850nm IR light, a $15 IR illuminator. You can also get it for $10 from Aliexpress [Here](https://s.click.aliexpress.com/e/_mtvyfyQ)
Orientation: Print on it's side.
Settings Used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.20mm
Wall Line Count: 4
Infill Percentage: 30%+
Support: Yes
Support Type: Tree Support
Fuzzy Skin: Disabled
Hardware Needed:
1x M5 30mm Socket Head Screw
2x M5 10mm Socket Head Screw
3x M5 Hex Nut
Credit to FFFTech for the Picatinny mount template.
LBRY Tags: 3d printed; guncad; ir illuminator; light mount; 3dprint