View this release
Alternative links
>> OLD POST <<
Redesigned Hoffman lower plate fits best on ez22
About:
this is just piece of plastic i made that holds the ez22 upper to hoffman tactical lower
this one uses screws only.. no pins required since the hole will grip firm enough until you reprint it.
requirements:
3 M6 bolts ( 33 - 32 mm nominal length >> don't measure the head).
[print material]
is PLA+
Print orientation: as the stl is.
support: yes.
Special thanks to hoffman and u/plastic_blasters for their creations.
LBRY Tags: ez22; hoffman; 3dprinting; guns
Redesigned Hoffman lower plate fits best on ez22
About:
this is just piece of plastic i made that holds the ez22 upper to hoffman tactical lower
this one uses screws only.. no pins required since the hole will grip firm enough until you reprint it.
requirements:
3 M6 bolts ( 33 - 32 mm nominal length >> don't measure the head).
[print material]
is PLA+
Print orientation: as the stl is.
support: yes.
Special thanks to hoffman and u/plastic_blasters for their creations.
LBRY Tags: ez22; hoffman; 3dprinting; guns