View this release
Alternative links
updated 4-15-2024: I made minor changes to the bolt and dust cover, i made a skeletonized cylinder to save weight.
a slightly updated version with steel chamber liners and a guide rod to hold it into battery.
It uses the same parts as the V1 but requires a 1 5/8" fence post or steel tube to be a chamber liner. it needs to have a 39-39.5mm ID to work with the majority of 37mm shells.
the guide rod should work with an unmodified carbine buffer spring. the guide rod and chamber axis rod can be made from 5/8" aluminum or printed and have 1/4-20 threaded rod inserted.
this is a fusion 360 file for now because i realized STEP files were losing most of the file management i was doing.
a slightly updated version with steel chamber liners and a guide rod to hold it into battery.
It uses the same parts as the V1 but requires a 1 5/8" fence post or steel tube to be a chamber liner. it needs to have a 39-39.5mm ID to work with the majority of 37mm shells.
the guide rod should work with an unmodified carbine buffer spring. the guide rod and chamber axis rod can be made from 5/8" aluminum or printed and have 1/4-20 threaded rod inserted.
this is a fusion 360 file for now because i realized STEP files were losing most of the file management i was doing.